Fully Automatic Intelligent Control System
Fully Automatic Intelligent Control System
Fully Automatic Intelligent Control System
+
  • Fully Automatic Intelligent Control System
  • Fully Automatic Intelligent Control System
  • Fully Automatic Intelligent Control System

Description

Dry mortar electrical control system is an important part in the production process of dry mortar. It plays a crucial role in ensuring the efficient, stable and precise production of dry mortar.

 

System Composition

● Control Center: Usually consists of a programmable logic controller (PLC) and a human-machine interface (HMI). The PLC is responsible for data processing and control command issuance, while the HMI allows operators to monitor and adjust system parameters.

● Motor Control Unit: Controls the motors of various devices such as conveyors, mixers and crushers, ensuring their stable operation and accurate speed regulation.

● Sensor Module: Includes sensors like level sensors, weight sensors and temperature sensors. They monitor real-time production data and send the information to the control center.

 

Functions

● Automated Production Control: It realizes the automatic control of the whole production process, from raw material feeding to finished product packaging, improving production efficiency and reducing labor costs.

● Accurate Batching: With the help of precise sensors and control algorithms, it can accurately measure and batch various raw materials to ensure the stability of product quality.

● Fault Diagnosis and Alarm: It continuously monitors the operation status of the system. Once a fault is detected, it can quickly locate the problem and send out an alarm signal to facilitate maintenance.

 

Advantages

● High Reliability: Adopts high-quality components and advanced control technology to ensure the stable operation of the system in harsh industrial environments.

● Good Compatibility: It can be easily integrated with other production equipment and systems, meeting different production process requirements.

● Easy to Operate and Maintain: The intuitive HMI interface makes operation simple, and the modular design facilitates system maintenance and upgrades.

TAG:

Electronic Control System

Fully Automatic Intelligent Control System

Dry mortar electrical control system is an important part in the production process of dry mortar.
Fully Automatic Intelligent Control System
Fully Automatic Intelligent Control System
Fully Automatic Intelligent Control System
+
  • Fully Automatic Intelligent Control System
  • Fully Automatic Intelligent Control System
  • Fully Automatic Intelligent Control System

Contact Us

sisoulzg@126.com

+86 13963913992

Classification

Electronic Control System

Product Consulting Related Products File Download

Customer visits

Customer Visits5
Customer Visits4
Customer Visits3
Customer Visits2

Packaging and Shipping

Packaging and Shipping5
Packaging and Shipping4
Packaging and Shipping3
Packaging and Shipping2

FAQs

My site is not in an ordinary location. Could you provide a corresponding plan to build a dry mortar production line for me?

Of course, we can provide one-on-one customized services to help you not only realize the site construction but also achieve cost reduction and efficiency improvement.

What sand-making equipment is used in the dry mortar production line?

In the realm of dry mortar production, Zhongqinglin Heavy Industry's VK Sand Making Machine has emerged as a core equipment that commands industry attention, thanks to its distinctive design and exceptional performance.

What kind of sand making machine are you using? Is the crushing effect good?

We use vertical shaft impact crushing equipment, and its crushing effect ensures high-quality particle shape. By allowing materials to break along their natural textures, the produced aggregates are cubic, with low content of needle-like and flake-like particles and uniform gradation, laying a solid foundation for high-quality mortar.

What should I do if the aggregate conveyed by the belt is uneven?

It is necessary to adjust the unloading sequence of aggregates to ensure that sand is unloaded last. This is like planning a reasonable driving route for a road, allowing various aggregates to "travel" on the belt in an orderly manner. Secondly, adjust the unloading time interval of various aggregates according to the distribution of aggregates on the belt to ensure that the materials on the belt are continuously and evenly distributed.

What problems will occur with dry-mix mortar admixtures in high-temperature weather?

Water-retaining components such as cellulose ether and starch ether will absorb moisture in the air and agglomerate when the humidity exceeds 80%. This directly causes the water retention of the mortar to decrease by more than 30%, making it prone to bleeding and delamination during construction, and increasing the risk of surface cracking after hardening by 40%.

What problems will occur with dry-mix mortar raw materials in high-temperature weather?

Cement, lime and other cementitious materials have extremely strong hygroscopicity. In high-humidity environments, their surfaces will quickly absorb moisture to form calcium hydroxide lumps. When caking is severe, lumps with a diameter of over 5mm may block the discharge port of the screw conveyor, causing the measurement deviation of the batching scale to exceed ±2%, and may even cause jamming and damage to the blades of the mixing equipment. If the storage silos for admixtures such as fly ash and slag powder are not tightly sealed, in an environment with a relative humidity >75%, fine particles will agglomerate into spherical particles with a diameter of 1-3 cm due to surface tension. These "pseudo particles" tend to form an "arch bridge" structure at the cone of the silo during the falling process, resulting in material flow interruption. If the initial moisture content of aggregates such as fine sand and quartz sand exceeds 3%, the moisture is difficult to naturally evaporate in a hot and humid environment. When these high-moisture aggregates are mixed with cement, a "pre-hydration" phenomenon may occur: the fluidity of the mortar decreases by 20%-30% when it leaves the mixer, the setting time is shortened by 1-2 hours, and in severe cases, "false setting" occurs, resulting in honeycombing and pitting on the construction surface.

Can engineers be sent to our site for installation and training?

We’ll send experienced engineers to the customer's site to guide equipment installation and debug the equipment. We will also provide installation instructions, layout drawings, assembly drawings, etc.

What is the positioning and cost performance of your products?

We have professional engineers, skilled production workers, high-standard quality inspection, and pre-sales and after-sales service teams with effective communication. We can assemble and test all the equipment and pack them carefully before delivery. Maybe our price is not the lowest, but we pursue the best service and quality and we are definitely your most suitable and trustworthy partner.

Are you a factory, a design company, or a trading company?

We are a manufacture factory with our own mechanical and project design engineers. We can provide customized solution design according to customers’ requirement, and full-process services such as early project discussion, scheme design, equipment selection, site planning, equipment layout, transportation and delivery, installation and commissioning.

Can you provide technical and process guidance?

Yes. We have rich experience in mortar production, and we will customize the equipment according to your needs and provide a full range of project guidance. We can reasonably design the layout and site planning according to the size of your workshop, and provide technical support for mortar formulas.

I don't have the formula, can you send me one?

Yes, we have more than 500 customers and they are willing to share the formula.

Get A Quote

Note: Please leave your contact information and our professionals will contact you as soon as possible!

Submit

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

Cookie

Our website uses cookies and similar technologies to personalize the advertising shown to you and to help you get the best experience on our website. For more information, see our Privacy & Cookie Policy

These cookies are necessary for basic functions such as payment. Standard cookies cannot be turned off and do not store any of your information.

These cookies collect information, such as how many people are using our site or which pages are popular, to help us improve the customer experience. Turning these cookies off will mean we can't collect information to improve your experience.

These cookies enable the website to provide enhanced functionality and personalization. They may be set by us or by third-party providers whose services we have added to our pages. If you do not allow these cookies, some or all of these services may not function properly.

These cookies help us understand what you are interested in so that we can show you relevant advertising on other websites. Turning these cookies off will mean we are unable to show you any personalized advertising.

Send Us a Message

Main Features* Note: Please be sure to fill in the information accurately and keep communication open, we will get in touch with you as soon as possible

Submission